Home - eStore - Video - Rides - Forums - Clubs - Album - Tech - Projects - Showcase - Chat - Links - FAQ
You are not logged in.
.:Login:.
.:Register:.
 

SPEEDHUT.COM CUSTOM BEZEL INSTALL

REQUIRED TOOLS
MATERIALS
(Check manual for types, amounts and applicability)
TIME
Phillips Screwdriver New Bezel Face 30 Minutes

By BlackDragon

This install was done on a 2000 Durango R/T but is the same for a 2001 Ram. I'm not sure about other year models.

It took about 30 minutes and the only tool requierd was a phillips screwdriver.

I started by removing the dash cover. This was real easy since there are no screws. It just snaps in. I did have to put the gear shift in first to get it around the steering column. (It's an auto tranny).

There are only 4 screws holding the guage cluster in the dash. Be careful, the grear indicator cable must be removed to get it all the way out. It runs from the bottom right side of the guage cluster, under the steering column and attaches on the left side.

Now that the cluster is out take it to the workbench to make it easier to work on. Remove the 7 screws holding the clear cluster cover in place.

I did a dry run test fit to make sure it would work right. Of course, it did.

I cut several pieces of the 3M double sided tape that came with the bezel to hold it in place. SPEEDHUT sent way more than I needed.

After the new bezel is in place, re-attach the clear cover and re-install the cluster in the dash. Don't forget the shift lever indicator cable. You'll have to adjust it so that it reads correctly in all gears.

Snap the dash cover back in place and enjoy.

Here is my finished product. What do you think?


Promote your business on PavementSucks!

Sponsors - Legal - Privacy Policy - Contact Us - Advertising Info
All Rights Reserved, ©PavementSucks.com, a division of OHVhost.com

Last modified:
February 24, 2004
PavementSucks.com
P.O. Box 579717
Modesto, CA 95357-9717
Page Loaded in
0.024617 sec.

PavementSucks.com is not affiliated with any OEM or aftermarket vehicle or component manufacturers such as Dodge, Chevy, Ford, Toyota, International, Jeep, Chrysler, Kia, Mitsubishi, Nissan, Mercedes, Land Rover or Hummer, nor any of their specific vehciles be it four wheel drive, 4x4, offroad, four-wheel drive, 4WD, all wheel or all-wheel drive, or AWD. Any technical information provided herein is informational only and does not necessarily represent actual procedures, specifications or techniques required to perform any maintenance or modifications on body lifts, lift kits, suspension, engine or motor modifications, emissions, mounting or dismounting tires, roll cages, exo cages, winches, bumpers, body work, axle or drivetrain, transfer case, transmission, driveshaft, chassis or frame components, electronics, stereo, head units, amplifiers, speakers, speaker boxes, speaker box carpet, speaker wires, power wires, batteries, alternators, power inverters or converters. PavementSucks.com makes no claim to the application of any content herein to the sport or hobby of rock crawling, mud bog, four wheel driving, trail riding, mud racing, rock racing, competition, 4wheeling, offroading, snow wheeling, street driving, mall crawling, urban wheeling, camping, boating, towing, trailering, RV use, or hauling personal watercraft. PavementSucks.com makes no claim to the safety or correctness of parts, components, assembly or assemblies, methods and procedures mentioned within the site. PavementSucks.com recommends using proper repair manuals, owners manual, instructions, guides, tools and procedures for all work represented herein.


Outside Hub